Energeon Technology Private Limited

Storage Battery Series Charge-Discharge Testing Instrument - Model DSF40Overview: The DSF40 is a versatile and reliable charge-discharge testing instrument designed for storage battery series. It caters to both lithium-ion and lead-acid battery packs, making it suitable for a wide range of applications in battery testing and maintenance. This instrument is built to provide accurate and efficient testing capabilities, ensuring the longevity and performance of the batteries being tested.Technical Specifications:• Input Voltage: AC 220V±10% 50Hz/60Hz• Input Power: Full loading: 2500W, No loading: 13W• Applicable Batteries: Lithium-ion and lead-acid battery packsBasic Functions:• Charge• Discharge• Auto cycle charge and discharge• Data analysis and comparisonVoltage Specifications:• Charge Constant Voltage Range: 9V-99V, 0.1V stepping• Discharge Cut-off Voltage Range: 9V-99V, 0.1V stepping• Tolerance: <0.03VCurrent Specifications:• Charge Current: 0.5 – 20 A adjustable• Charge Cut-off Current: 0.1 – 5 A adjustable• Discharge Current: 0.5-40A adjustable• Tolerance: <0.03AData Recording:• Conditions: Time interval, Voltage interval, Current intervalCharge Details:• Charge Modes: Constant current & constant voltage charge• Charge Cut-off Conditions: Voltage, current, time, capacity, temperature, and temperature rising rateDischarge Details:• Discharge Modes: Constant current discharge• Discharge Cut-off Conditions: Voltage, current, time, capacitySafety and Protection:• Battery Temperature Alarm: The software provides an alarm via a pop-up window and the device emits a buzzer alarm when the battery temperature reaches the set value.• Cycle Index: 1-16 times• Protection Mechanisms: Power-down protection, reverse connection, over-temperature protection, over-voltage protection, short-circuit protection

Physical and Environmental Specifications:• IP Grade: IP20• Channel Control Mode: Independent control• High Voltage Insulation Between Channels: AC1000V/2min• Voltage & Current Test Sampling: Four-core wires connection• Noise Level: < 76 dBCommunication and Operation:• Host Computer Communication Method: TCP/IP protocol• Test Report Output Method: Excel• Server Disk Configuration: >200MB• Server Operating System: Windows XP or later with network port configuration• Communication Port: LAN• Operation Methods: Panel/SoftwareEnvironmental Conditions:• Operation Ambient Temperature: 0℃ - 40℃• Storage Temperature: -10℃ - 50℃• Operation Ambient Humidity: ≤ 70% RH (No condensation)• Storage Ambient Humidity: ≤ 80% RH (No condensation)Fixture Specifications:• Fixture Type: Clamp• Clamp Type: Pure Copper Crocodile Clamp (Reference image provided, actual product may vary)• Product Dimensions: 450(L) x 480(W) x 145(H) mm• Channel Number: 1• Number of Batteries to be Connected: 1Additional Information:• • The DSF40 is an advanced and efficient instrument designed for rigorous battery testing protocols. Its precise measurement capabilities, combined with robust protection mechanisms and versatile data recording options, make it an essential tool for professionals in the battery manufacturing and maintenance sectors.

BDC2000 is a high-power portable Regulated Intelligent battery charger with an adjustable constant voltage output of 1V-100V and an adjustable constant current output of 1A-20A, which can provide quick & precision charging for e-scooters, e-bicycles.

Description
The Portable Regulated Intelligent Battery Charger BDC2000 is a three-stage intelligent charger, double-loop cascade PID control the charging current and voltage, and the charging curve control is flexible and precise. BDC2000 can provide precision charging for Lead-acid and all types of lithium batteries. Charging voltage, charging current, and charging cut-off current can be set by the user. which can provide quick & precision charging for e-scooters, e-bicycles, e-tricycles, electric vehicles, and other electric mobilities.
BDC2000 provides two work modes, Charge Mode and Power Supply Mode. In power supply mode, BDC2000 can be used as a regula power supply for continuous battery powe supply.

Technical Specifications:

• Model No.: BDC2000

• Input Voltage: AC 220V±10%

• Maximum Output Power: 1800W

• Standby Power: 20W

• Constant Charge Voltage: 1V-100V

• Constant Charge Current: 1V-80V: 1A-20A

• Data Display: LCD

• Operation: Panel

• Weight: 3.5 KG

• Product Size: 28.0*13.5 * 14.

   

Description:

The Lead-Acid & Lithium Battery Series Charge Discharge Tester DSF20 is integrated with the function of a high-precision capacity series discharging test and a high-precision series charging test. With a wide voltage detection range from 9V to 99V which make it can measure varieties of batteries from 12V-84V. Charging test and discharge test can be performed for lead-acid batteries, lithium batteries and other types of batteries. The maximum charge & discharge cycle index is 16 times, which can also be used as the aging equipment in battery production.


The device provides two operation modes for the convenience of customers, Panel operation and Online operation. After installing the specified software, the device can be managed and operated through the computer: charge-discharge setting, data sampling, test report import and export, test data analysis, charge-discharge curves drawing. One computer can manage multiple devices simultaneously through a switch.

Description:

Lithium-Ion Battery/Cell Capacity Testing/Matching Analyzer DT2020 can be used for the capacity test, charge and discharge test, internal resistance test, capacity grading and matching, etc. of various types of lithium batteries, Ni-mH batteries, Ni-CD batteries. It can be compatible with 18650, 26650,32650, 33140, AAA, AA, A, pouch and block cells. DT2020 isolation detection technology can determine the location of the bad cells without disassembling the battery pack, then replace it. It can even charge and discharge the unbalanced battery pack to balance the battery and restore the battery pack to normal balance.

It's suitable for lithium battery performance test, life cycle test, balance maintenance, battery-pack assembling and EV battery repair and maintenance, etc.

20-Channel 5V 10A Lithium Cell Charge Discharge Testing and Balance Maintenance Machine DT50W-20

Lithium Battery Charge Discharge Testing and Balance Maintenance Machine DT50W-20 is capable of conducting capacity tests, charge and discharge characteristic tests, capacity grading and matching, balance maintenance, internal resistance tests, data analysis & comparison, etc., for a variety of Lithium batteries, NiMH batteries, and NiCD batteries. It offers physical compatibility with 18650, 26650, 32650, 33140 cells as well as pouch and prismatic cells. With its isolation measurement design, the DT50W can balance charge & discharge individual cells within a battery pack to ensure uniformity while identifying any faulty cells without requiring disassembly and restore unbalanced battery packs to their normal balanced state through balancing charge-discharge operations.
The device features a modular design, enabling parallel testing with a maximum current capacity of 200A.
prismatic cells. With its isolation measurement design, the DT50W can balance charge & discharge individual cells within a battery pack to ensure uniformity while identifying any faulty cells without requiring disassembly and restore unbalanced battery packs to their normal balanced state through balancing charge-discharge operations.

The device features a modular design, enabling parallel testing with a maximum current capacity of 200A.

The device is widely utilized in battery production facilities, battery recycling plants, research laboratories focusing on batteries development or new energy vehicle batteries testing and maintenance.

Lithium-Ion Battery/Cell Capacity Grading and Matching Tester DT50W-17 can be applicable for capacity test, auto-cycle charge and discharge test, capacity grading and matching, balance maintenance, internal resistance test, etc. of various Lithium Batteries, Ni-MH Batteries, Ni-Cd Batteries. It can be compatible with 18650, 21700,22650, 26650, 3265, 32140, 36650, pouch, and block cells. DT50W isolation detection technology can determine the location of the bad cells without disassembling the battery pack, then replace it. It can balance charge and discharge the unbalanced battery pack to balance the battery and restore the battery pack to normal balance.

It's suitable for lithium battery testing, maintenance, regeneration, pack assembling, etc.

20-Channel 5V 10A Lithium Cell Charge Discharge Testing and Balance Maintenance Machine DT50W-20 | High-Precision Battery Cycler System for Manufacturers
Description:
Battery grading equipment, battery balance testerInput Power: AC200V ~ 245V50/60HZApplicable Batteries: Li-ion / Polymer / NiMH / NiCd battery cellsCon-Voltage Range: 1V-5VCurrent Output: 0.5A-10AOperation Method: Online
5V 10A Li-Ion Tester DT50W-20: Advanced Battery Cycler System for er System Professional Manufacturers
The 5V 10A Li-lon Tester DT50W-20 by DK is engineered to meet the rigorous demands of professional manufacturers. This advanced battery cycler system is ideal for testing and analyzing Li- lon batteries, providing precise data that aids in the development of high-performance battery packs. With its robust design and reliable performance, it stands as a vital tool in the battery manufacturing industry.
Why Choose the DK 5V 10A Li-Ion Tester?
Manufacturers looking for a dependable and efficient battery cycler system will find the DK 5V 10A Li-Ion Tester to be an indispensable asset. Its ability to deliver consistent results with high accuracy makes it perfect for extensive batte. testing and quality control. The system's use friendly interface and flexible testing param allow for customized test cycles, ensuring comprehensive analysis for every battery type.

Key Features and Benefits

• High Precision Testing: Achieve accurate and reliable results with advanced technology designed for professional-grade battery testing.

• Robust Design: Durable construction ensures long-term use, making it a cost-effective solution for manufacturers.
• Flexible Testing Options: Customize test cycles to meet specific requirements, providing versatility in battery analysis.
• Comprehensive Data Analysis: Obtain detailed insights into battery performance, aiding in the development of superior battery products.

Applications of the 5V 10A Li-Ion Tester
This battery cycler system is ideal for a wide range of applications, including:

• Battery manufacturing and R&D
• Quality control in battery production
• Performance testing of Li-lon batter

Invest in the Best with DK
Choose the DK 5V 10A Li-lon Tester DT50W-20 for your manufacturing needs and ensure your batteries meet the highest standards of quality and performance. Contact us today to learn more about how this advanced system can elevate your battery testing processes.
Lithium Battery Charge Discharge Testing and Balance Maintenance Machine DT50W-20
is capable of conducting capacity tests, charge and discharge characteristic tests, capacity grading and matching, balance maintenance, internal resistance tests, data analysis & comparison, etc., for a variety of Lithium batteries, NiMH batteries, and NiCD batteries. It offers physical compatibility with 18650, 26650, 32650, 33140 cells as well as pouch and prismatic cells. With its isolation measurement design, the DT50W can balance charge & discharge individual cells within a battery pack to ensure uniformity while identifying any faulty cells without requiring disassembly and restore unbalanced battery packs to their normal bale state through balancing charge-discharge operations.

The device features a modular design, enabling parallel testing with a maximum current capacity of 200A.
The device is widely utilized in battery production facilities, battery recycling plants, research laboratories focusing on batteries development or new energy vehicle batteries testing and maintenance.